Older Years Suzuki DF 4, Clutch Lever - parts catalog
Clutch Lever
- S/N 00402F-310001 to 00402F-31XXXX| Parts Diagram | ## | Part # | Description | Qty | Notes |
 | 1 | 21110-91JL0 | Clutch Lever | 1 | |
| 2 | 21120-91JL0 | Clutch Notch Plate | 1 | ||
| 3 | 21216-91J00 | Clutch Shaft Spacer | 1 | ||
| 4 | 23111-91J01 | Clutch Rod | 1 | ||
| 5 | 23211-91J00 | Clutch Rod Arm | 1 | ||
| 6 | 23212-91J00 | Clutch Notch Pin | 1 | ||
| 7 | 23213-91J00 | Clutch Notch Spring | 1 | ||
| 8 | 23310-91J00 | Clutch Rod Connector | 1 | ||
| 9 | 23321-91J00 | Clutch Rod Connector | 1 | ||
| 10 | 09116-06227 | Bolt (6x20) | 2 | ||
| 11 | 09128-06014 | Bolt (6x20) (NLA) | 1 | ||
| 12 | 09160-06145 | Washer (6.2x19x3.0) | 1 | ||
| 13 | 09204-01002 | Cotter Pin | 1 | ||
| 14 | 09280-16005 | O-Ring | 2 | ||
| 15 | 09383-04002 | E Ring | 1 |
1) All quantities shown are the total used for that part.
2) Dimensions of the parts in catalog are in Millimeters
3) Abbreviations used in catalog are as follows:
AR: As Required
ASSY: Assembly
E.NO.: Engine Number
F.NO.: Frame Number
D: Diameter
ID: Inside Diameter
OD: Outside Diameter
L: Length
LH(PORT): Left Hand Side
RH(STBD): Right Hand Side
PTT: Power Tilt & Trim
NT: Number of Teeth
OPT: Optional
OS: Oversize
STD: Standard
T: Thickness
US: Undersize
W: Width
W/: With
S, L, X, XX: Transom Type
SUS: Stainless Steel
S/N: Serial Number
(NLA): No Longer Available - Discontinued
Type:
S - Short Shaft 15"
L - Long Shaft 20"
X - X Long Shaft 25"
XX - XX Long Xhaft 30"
4) Inner Parts of an Assembly - Part name with a dot (.) in front as shown in the description column indicates the component of the assembly is also available individually and is included with the part above it.
