Older Years Suzuki DF 4, Clamp Bracket - parts catalog
- Home
- Parts
- Outboard motors
- Suzuki
- Older years suzuki df 4 parts list 01
- Clamp bracket
Clamp Bracket
- S/N 00402F-310001 to 00402F-31XXXX| Parts Diagram | ## | Part # | Description | Qty | Notes |
 | 1 | 41111-91J20-0EP | Starboard Clamp Bracket | 1 | |
| 2 | 41121-91J20-0EP | Port Clamp Bracket | 1 | ||
| 3 | 41210-986L1 | Clamp Screw Assembly | 1 | ||
| 4 | 41212-91J00 | Clamp Handle | 2 | ||
| 5 | 41213-98100 | Clamp Plate | 2 | ||
| 6 | 09205-06007 | Spring Pin (6x25) | 2 | ||
| 7 | 09100-06177 | Bolt (6x140) | 1 | ||
| 8 | 09100-10321 | Bolt (10x150) | 1 | ||
| 9 | 29141-93J00 | Nut (6mm) | 1 | ||
| 10 | 09159-10L07 | Nut | 1 | ||
| 11 | 09160-06082 | Washer (6.5x13x1.0) | 1 | ||
| 12 | 09160-10082 | Washer (10.5x19x2.0) | 1 | ||
| 13 | 09180-06357 | Spacer (6.5x10.5x104) | 1 | ||
| 14 | 45420-92DL0 | Tilt Lock Pin | 1 | ||
| 15 | 69911-91J20 | Clamp Bracket Mark | 1 |
1) All quantities shown are the total used for that part.
2) Dimensions of the parts in catalog are in Millimeters
3) Abbreviations used in catalog are as follows:
AR: As Required
ASSY: Assembly
E.NO.: Engine Number
F.NO.: Frame Number
D: Diameter
ID: Inside Diameter
OD: Outside Diameter
L: Length
LH(PORT): Left Hand Side
RH(STBD): Right Hand Side
PTT: Power Tilt & Trim
NT: Number of Teeth
OPT: Optional
OS: Oversize
STD: Standard
T: Thickness
US: Undersize
W: Width
W/: With
S, L, X, XX: Transom Type
SUS: Stainless Steel
S/N: Serial Number
(NLA): No Longer Available - Discontinued
Type:
S - Short Shaft 15"
L - Long Shaft 20"
X - X Long Shaft 25"
XX - XX Long Xhaft 30"
4) Inner Parts of an Assembly - Part name with a dot (.) in front as shown in the description column indicates the component of the assembly is also available individually and is included with the part above it.
