Older Years Suzuki DF 150, Gear Case - parts catalog
Gear Case
- S/N 15002F-210001 to 15002F-21XXXX| Parts Diagram | ## | Part # | Description | Qty | Notes |
 | 1 | 55110-93J20-0EP | Gear Case Housing | 1 | |
| 2 | 09263-32017 | .Pinion Bearing | 1 | ||
| 3 | 09100-12052 | Bolt (12x70) | 1 | ||
| 4 | 09116-10150 | Bolt (10x55) | 6 | ||
| 5 | 09160-12066 | Washer (12.5x22x2.5) | 1 | ||
| 6 | 17566-87D11 | Gear Case Grommet | 1 | ||
| 7 | 09202-08006 | Knock Pin (8x12) | 2 | ||
| 8 | 55125-98J00-0EP | Trim Tab (Black) | 1 | ||
| 9 | 09116-08137 | Bolt (8x22) | 1 | ||
| 10 | 55128-93J10 | Drain Plug | 3 | ||
| 11 | 09168-10034 | Drain Plug Gasket | 3 | ||
| 12 | 55320-95311 | Zinc Anode | 2 | ||
| 13 | 09116-06094 | .Bolt (6x15) | 2 | ||
| 14 | 55332-87D11 | Exhaust Seal Rubber | 1 | ||
| 15 | 55333-87D10 | Exhaust Seal Plate | 1 | ||
| 16 | 55127-87D00 | Speedometer Hose Union | 1 | ||
| 17 | 09355-40805-00B | Hose (4x8x2000) | 1 | ||
| 18 | 09362-09008 | Nipple | 1 | ||
| 19 | 09407-10404 | Clamp (L:100) | 2 | ||
| 20-8 | 990C0-00834-25P | S/S Propeller 4x14-3/8x25 | 1 | ||
| 20-2 | 990C0-00830-19P | S/S Propeller 3x15-1/4x19 | 1 | ||
| 20-10 | 990C0-00834-28P | S/S Propeller 4x14-3/8x28 | 1 | ||
| 20-7 | 990C0-00834-23P | S/S Propeller 4x14-3/8x23 | 1 | ||
| 20-11 | 990C0-00834-29P | S/S Propeller 4x14-3/8x29 | 1 | ||
| 20-3 | 990C0-00830-21P | S/S Propeller 3x15x21 | 1 | ||
| 20-9 | 990C0-00834-27P | S/S Propeller 4x14-3/8x27 | 1 | ||
| 20-5 | 990C0-00830-25P | S/S Propeller 3x14-1/2x25 | 1 | ||
| 20-6 | 990C0-00830-27P | S/S Propeller 3x14-1/2x27 | 1 | ||
| 20-1 | 990C0-00830-17P | S/S Propeller 3x15-1/2x17 | 1 | ||
| 20-4 | 990C0-00830-23P | S/S Propeller 3x14-3/4x23 | 1 | ||
| 21 | 58105-93J00 | .Propeller Bushing | 1 | ||
| 22 | 57632-93J11 | Propeller Stopper | 1 | ||
| 23 | 57633-87D30 | Propeller Nut Spacer | 1 | ||
| 24 | 09141-18005 | Nut 18mm | 1 | ||
| 25 | 09160-18028 | Washer (18.5x31x1.0) | 1 | ||
| 26 | 09204-03003 | Prop Nut Cotter Pin | 1 | ||
| 27 | 57630-92E00 | Propeller Hardware Kit | 1 | ||
| 28 | 25700-93J00 | Gear Case Seal Kit | 1 |
1) All quantities shown are the total used for that part.
2) Dimensions of the parts in catalog are in Millimeters
3) Abbreviations used in catalog are as follows:
AR: As Required
ASSY: Assembly
E.NO.: Engine Number
F.NO.: Frame Number
D: Diameter
ID: Inside Diameter
OD: Outside Diameter
L: Length
LH(PORT): Left Hand Side
RH(STBD): Right Hand Side
PTT: Power Tilt & Trim
NT: Number of Teeth
OPT: Optional
OS: Oversize
STD: Standard
T: Thickness
US: Undersize
W: Width
W/: With
S, L, X, XX: Transom Type
SUS: Stainless Steel
S/N: Serial Number
(NLA): No Longer Available - Discontinued
Type:
S - Short Shaft 15"
L - Long Shaft 20"
X - X Long Shaft 25"
XX - XX Long Xhaft 30"
4) Inner Parts of an Assembly - Part name with a dot (.) in front as shown in the description column indicates the component of the assembly is also available individually and is included with the part above it.
