Older Years Suzuki DF 140A, Starting Motor - parts catalog
- Home
- Parts
- Outboard motors
- Suzuki
- Older years suzuki df 140a parts list
- Starting motor
Starting Motor
- S/N 14002F-310001 to 14002F-31XXXX S/N 14002Z-310001 to 14002Z-31XXXX| Parts Diagram | ## | Part # | Description | Qty | Notes |
 | 1 | 31100-90J01 | Starter Motor Assembly | 1 | |
| 2 | 31131-90J01 | .Brush Set (+) | 1 | ||
| 3 | 31135-90J00 | .Spring | 4 | ||
| 4 | 31151-90J00 | .Gear Case | 1 | ||
| 5 | 31152-90J00 | .Center Plate (NLA) | 1 | ||
| 6 | 31153-90J00 | .Planet Gear Bracket | 1 | ||
| 7 | 31171-90J00 | .Dust Cover Kit | 1 | ||
| 8 | 31173-90J01 | .Brush Holder | 1 | ||
| 9 | 31191-90J00 | .Shift Lever | 1 | ||
| 10 | 31220-90J00 | .Magnet Switch | 1 | ||
| 11 | 31310-90J00 | .Armature | 1 | ||
| 12 | 31320-90J00 | .Pinion Assembly | 1 | ||
| 13 | 31341-90J00 | .Pinion Shaft (NLA) | 1 | ||
| 14 | 31343-90J00 | .Internal Gear (NLA) | 1 | ||
| 15 | 31344-90J00 | .Planetary Gear (NLA) | 3 | ||
| 16 | 31360-90J00 | .Washer Set | 1 | ||
| 17 | 31170-90J00 | .Rear Cover Assembly | 1 | ||
| 18 | 31912-90J00 | Starting Motor Band | 1 | ||
| 19 | 31918-90J10 | Lower Damper | 1 | ||
| 20 | 01550-08207 | Bolt | 2 | ||
| 21 | 01550-10507 | Bolt | 2 | ||
| 22 | 04211-13149 | Pin | 2 |
1) All quantities shown are the total used for that part.
2) Dimensions of the parts in catalog are in Millimeters
3) Abbreviations used in catalog are as follows:
AR: As Required
ASSY: Assembly
E.NO.: Engine Number
F.NO.: Frame Number
D: Diameter
ID: Inside Diameter
OD: Outside Diameter
L: Length
LH(PORT): Left Hand Side
RH(STBD): Right Hand Side
PTT: Power Tilt & Trim
NT: Number of Teeth
OPT: Optional
OS: Oversize
STD: Standard
T: Thickness
US: Undersize
W: Width
W/: With
S, L, X, XX: Transom Type
SUS: Stainless Steel
S/N: Serial Number
(NLA): No Longer Available - Discontinued
Type:
S - Short Shaft 15"
L - Long Shaft 20"
X - X Long Shaft 25"
XX - XX Long Xhaft 30"
4) Inner Parts of an Assembly - Part name with a dot (.) in front as shown in the description column indicates the component of the assembly is also available individually and is included with the part above it.
