1999-2010 Suzuki DF 50, Transmission - parts catalog
- Home
- Parts
- Outboard motors
- Suzuki
- 1999 2010 suzuki df 50 parts list
- Transmission
Transmission
(1999-2010) - S/N 510001 to 510465| Parts Diagram | ## | Part # | Description | Qty | Notes |
 | 1 | 56120-94321-0EP | Propeller Shaft Bearing Housing | 1 | |
| 2-2 | 09263-22020 | .Bearing (22.225x28.575.19.05) | 1 | ||
| 2-1 | 09263-22020 | .Bearing (22.225x28.575.19.05) | 2 | ||
| 2 | 09263-22020 | .Bearing (22.225x28.575.19.05) | 1 | ||
| 3 | 09289-22007 | .Oil Seal (21.2x35x5) | 2 | ||
| 4 | 09262-35070 | .Bearing (35x62x14) | 1 | ||
| 5-2 | 09116-08122 | Bolt (8x30) | 2 | ||
| 5-1 | 09117-08047 | Bolt (8x30) | 2 | ||
| 5 | 09117-08047 | Bolt (8x30) | 2 | ||
| 6 | 09280-75001 | O-Ring | 1 | ||
| 7-1 | 57110-87J30 | Drive Shaft (S) (NLA) | 1 | ||
| 7-2 | 57110-87J40 | Drive Shaft (L) | 1 | ||
| 8 | 57133-87J00 | Drive Shaft Collar | 1 | ||
| 9 | 09265-20005 | RT 20x42x15 Bearing | 1 | ||
| 10 | 09160-26015 | Washer (26.2x42x4.0) | 1 | ||
| 10-1 | 09181-35101 | Shim (0.50) | |||
| 10-4 | 09181-33006 | Washer (0.80) (NLA) | |||
| 10-5 | 09181-33008 | Washer (0.90) (NLA) | |||
| 10-6 | 09181-35111 | Shim (1.0) | |||
| 10-3 | 09181-33004 | Washer (0.70) | |||
| 10-2 | 09181-33002 | Washer (0.60) | |||
| 11 | 57300-87851 | Pinion & Gear Set | 1 | ||
| 12 | 09140-12034 | Pinion Nut | 1 | ||
| 13-6 | 08211-35451 | Shim (1.00) | |||
| 13-2 | 09181-35131 | Shim (0.60) | |||
| 13-3 | 09181-35132 | Shim (0.70) | |||
| 13 | 09263-25062 | BT 25x42x5 Bearing | 1 | ||
| 13-4 | 08221-35456 | Shim (0.80) | |||
| 13-1 | 08221-35455 | Shim (0.50) | |||
| 13-5 | 09181-35136 | Shim (0.90) | |||
| 14-4 | 09181-30190 | Shim (0.80) | |||
| 14-2 | 09181-30187 | Shim (0.60) | |||
| 14-5 | 09181-30192 | Shim (0.90) | |||
| 14-1 | 09181-30186 | Shim (0.50) | |||
| 14 | 09440-30005 | Spring | 1 | ||
| 14-3 | 09181-30188 | Shim (0.70) | |||
| 15-5 | 09160-22022 | Washer (2.20) | |||
| 15-4 | 09160-22021 | Washer (2.10) | |||
| 15-2 | 09160-22019 | Washer (1.90) | |||
| 15-6 | 09160-22023 | Washer (2.30) | |||
| 15-3 | 09160-22020 | Washer (2.00) | |||
| 15-1 | 09160-22018 | Washer (1.80) | |||
| 16 | 08211-20263 | Thrust Washer | 1 | ||
| 17 | 57610-94402 | Propeller Shaft Assembly | 1 | ||
| 18 | 57621-87J02 | Clutch Dog Shifter | 1 | ||
| 18-5 | 09181-35136 | Shim (0.90) | |||
| 18-2 | 09181-35131 | Shim (0.60) | |||
| 18-4 | 08221-35456 | Shim (0.80) | |||
| 18-1 | 08221-35455 | Shim (0.50) | |||
| 18-6 | 08211-35451 | Shim (1.00) | |||
| 18-3 | 09181-35132 | Shim (0.70) | |||
| 19 | 09202-05022 | Clutch Dog Shifter Pin | 1 | ||
| 19-1 | 09181-30186 | Shim (0.50) | |||
| 19-4 | 09181-30190 | Shim (0.80) | |||
| 19-2 | 09181-30187 | Shim (0.60) | |||
| 19-5 | 09181-30192 | Shim (0.90) | |||
| 20 | 57634-88L00 | Push Pin | 1 | ||
| 20-6 | 09160-22023 | Washer (2.30) | |||
| 20-1 | 09160-22018 | Washer (1.80) | |||
| 20-3 | 09160-22020 | Washer (2.00) | |||
| 20-2 | 09160-22019 | Washer (1.90) | |||
| 20-4 | 09160-22021 | Washer (2.10) | |||
| 20-5 | 09160-22022 | Washer (2.20) | |||
| 21 | 09440-08034 | Return Spring | 1 | ||
| 22 | 09440-40002 | Clutch Dog Spring | 1 | ||
| 23 | 57631-95303 | Push Rod | 1 | ||
| 24 | 09202-05022 | Clutch Dog Shifter Pin | 1 | ||
| 25 | 57634-88L00 | Push Pin | 1 | ||
| 26-1 | 09440-08034 | Return Spring | 1 | ||
| 26-2 | 09440-08043 | Return Spring | 1 | ||
| 27 | 09440-40002 | Clutch Dog Spring | 1 | ||
| 28 | 57631-95303 | Push Rod | 1 | ||
| 29 | 57130-94301 | Drive Shaft Bushing | 1 |
1) All quantities shown are the total used for that part.
2) Dimensions of the parts in catalog are in Millimeters
3) Abbreviations used in catalog are as follows:
AR: As Required
ASSY: Assembly
E.NO.: Engine Number
F.NO.: Frame Number
D: Diameter
ID: Inside Diameter
OD: Outside Diameter
L: Length
LH(PORT): Left Hand Side
RH(STBD): Right Hand Side
PTT: Power Tilt & Trim
NT: Number of Teeth
OPT: Optional
OS: Oversize
STD: Standard
T: Thickness
US: Undersize
W: Width
W/: With
S, L, X, XX: Transom Type
SUS: Stainless Steel
S/N: Serial Number
(NLA): No Longer Available - Discontinued
Type:
S - Short Shaft 15"
L - Long Shaft 20"
X - X Long Shaft 25"
XX - XX Long Xhaft 30"
4) Inner Parts of an Assembly - Part name with a dot (.) in front as shown in the description column indicates the component of the assembly is also available individually and is included with the part above it.
